Description
Zip Sliders (No.5)
Available in Light Beige, Black or Grey.
Supplied in bags of 50, 100, or 200.
These zip sliders (No.5) are used with the continuous zip, (also supplied by AJT Supplies). Continuous zip and zip sliders (No.5) are mainly used for furniture seat and back cushions, can be sewn into the furniture to allow an opening for the filling to be inserted and removed.
Please be aware that these zip sliders (No.5) may not work with continuous zip that you may already have that was not purchased by AJT Upholstery Supplies. You can purchase continuous zipping from us by the metre or by the roll. If you require a zip slider sample to try on your continuous zip that you already have, please contact AJT Upholstery Supplies on 01384639990. You will be required to pay a small postage and packing charge.
Please see below for more information on how to affix these zip sliders (no.5) to our zip.
Step 1 – Notch the end: Start by cutting you continuous zip to required length and cutting a V out of the end of the continuous zip.
Step 2 – Separate the end: of the continuous zip about 2 or 3 inches. (or, if you prefer, you may fully separate the continuous zip)
Step 3 – Align Slider with continuous zip: Put the ends of the zip teeth into the front (double opening) end of the zip sliders until the teeth come together and stop at the back of the slide.
Step 4 – Pull Slider onto Zip: Grab hold of the two pointed ends of the continuous zip while you pull the zip slider up the zip.
***Zip slider Jig also available to make affixing sliders to continuous zip a lot easier!***
